on off – Blog eTechPath https://blog.etechpath.com Tue, 03 Jan 2023 12:35:53 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.5 https://blog.etechpath.com/wp-content/uploads/2017/08/BrandLogo12-150x150.png on off – Blog eTechPath https://blog.etechpath.com 32 32 How to Start Telnet Client in Windows 7 https://blog.etechpath.com/how-to-start-telnet-client-in-windows-7/ https://blog.etechpath.com/how-to-start-telnet-client-in-windows-7/#respond Sat, 09 Sep 2017 02:49:41 +0000 https://blog.etechpath.com/?p=291 About:

Telnet is a protocol that helps you to connect to remote computers and local network computers over a TCP / IP ports or networks. In windows operating system, telnet client is disabled by default. So, you need to enable it from windows features.

 

Steps:  

  1. Click Start and then Go to Control Panel .telnet_client_step1
  2. Click Programs and Feature and Open Turn Windows feature on or off  .telnet_client_step2
  3. Check Telnet Client check box form Windows Features dialog box and click OK. System will install necessary files to your system by itself.telnet_client_step3
  4. To start telnet in command prompt, Open CMD from Start menu and execute this command once,  pkgmgr/iu:”TelnetClient” and press enter.telnet_client_step4



  5. Now you can start using telnet client to connect to remote computer or webpage, For that input command ‘telnet’ followed by IP address/ webpage with telnet port i.e 23 in my case.  example: telnet 192.168.1.200 23telnet_client_step5( Note : System may ask for user ID and password to connect proposed remote computer. )

 

]]> https://blog.etechpath.com/how-to-start-telnet-client-in-windows-7/feed/ 0