shared – Blog eTechPath https://blog.etechpath.com Tue, 03 Jan 2023 12:36:20 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.5 https://blog.etechpath.com/wp-content/uploads/2017/08/BrandLogo12-150x150.png shared – Blog eTechPath https://blog.etechpath.com 32 32 How to share files between Raspberry Pi & Windows using shared folder. https://blog.etechpath.com/how-to-share-files-between-raspberry-pi-windows-using-shared-folder/ https://blog.etechpath.com/how-to-share-files-between-raspberry-pi-windows-using-shared-folder/#respond Sat, 21 Oct 2017 22:37:03 +0000 https://blog.etechpath.com/?p=435 About:
For sharing files between Raspberry Pi and Windows we need to setup a file server on Raspberry Pi, here in this tutorial we will use SAMBA file server to share files between two different operating systems.

What is SAMBA:

SAMBA is Linux based free tool which is widely used for file sharing in Windows PC, Apple Computers, and Unix-based operating systems. It is re-implementation of SMB/CIFS standard networking protocol and was developed by Andrew Tridgell. This tool is written in C,C++ and Python programming language and licensed under GPLv3.

How to Setup SAMBA in Raspberry Pi

1.Update apt

pi@raspberrypi ~ $ sudo apt update

 

2. Install SAMBA on your raspberry pi,

pi@raspberrypi ~ $ sudo apt-get install samba




(adsbygoogle = window.adsbygoogle || []).push({});

3. After finishing installation, configure SAMBA by editing configuration file /etc/samba/smb.conf

pi@raspberrypi ~ $ sudo nano /etc/samba/smb.conf

In this configuration file, you will need to add the workgroup name of the computer which you are going to connect with the raspberry pi.  To find workgroup name in windows 7 :- Right click on My Computer and enter properties -> Full computer name is your workgroup name (Example =>).

workgroup name
workgroup name
workgroup = MYWORKGROUP
wins support = yes

Replace MYWORKGROUP with your workgroup name. Save & exit the file by pressing ctrl+X , Y, Enter. Change wins support to yes.

 

4. Create shared folder in raspberry pi directory and give read, write & execute permission for this folder to all users.

pi@raspberrypi~ $ mkdir /home/pi/shared
pi@raspberrypi~ $ chmod 777 /home/pi/shared

 

5. Define the behavior  of shared folder. For that purpose we will net to edit configuration file again. /etc/samba/smb.conf

pi@raspberrypi ~ $ sudo nano /etc/samba/smb.conf

Add following lines in this file. Save & exit by pressing ctrl+X, Y, Enter.

[pishare]  
     comment = pi shared folder
     path = /home/pi/shared
     browsable = yes
     guest ok = yes
     writable = yes

 

6. Restart SAMBA,

pi@raspberrypi ~ $ sudo /etc/init.d/samba restart





How to setup shared folder in Windows:

  1. Make sure your computer and raspberry pi connected to same network and configured properly.
  2. Open Network tab on the left side of explorer window.
  3. After searching process, you will see a shared computer named as your raspberry pi hostname.
  4. Open it up and you will find Shared folder inside it which we have just created in raspberry pi.
  5. Now you can start sharing files and taking backup between your raspberry pi and windows computer.
]]>
https://blog.etechpath.com/how-to-share-files-between-raspberry-pi-windows-using-shared-folder/feed/ 0